Popular items supplied by Mountain States Pipe and Supply See Mueller Home Page for more product selections
Pipe Repair Products
Mueller Full-Seal Pipe Repair Clamps provide an economical repair for circumferential breaks or cracks, multiple leaks or holes in pipe. They are available in standard lengths for cast iron and steel pipe, and with an “add-on” option for longer lengths. Each clamp size can accommodate a wide range of O.D. variations.
Mueller Drilling Machines
These machines are part of a complete system of NO-BLO Equipment, Products and Methods developed by Mueller to perform the variety of operations needed to install, extend and maintain today’s gas systems. The design of each part of this system helps everything work together efficiently for strong, leak-tight NO-BLO Installations.
The Mueller No Blo Meter Valves are the standard of the Gas Industry. From Non Insulated to Insulated, Tamper Proof to Non Tamper Proof, Mueller Valves have become the standard is sizes from 1/2″ thru 2″
Briscoe Meter Valve
Service Meters without Interruption. The Brisco Bypass Meter Valve is based on our proven Luboseal® design and can be relubricated while in service. It enables gas technicians to perform a number of maintenance operations without interrupting gas flow to the customer. It eliminates the need for scheduled service calls or re-lights, and offers many cost saving advantages in the installation and service of gas meter sets.
Mueller Valve Changer Tools
Normally, the gas meter valve provides the primary shut-off point on the gas service line. If this valve needs to be replaced for any reason, there is often no other convenient shut-off point upstream of the valve. The Mueller NO-BLO Valve Changer provides a safe, effective and easy to use means for stopping gas flow upstream of the meter valve allowing the valve to be replaced. It also allows the MIP threads on the riser to be refurbished, if necessary. The Mueller valve changer – a Mueller NO-BLO System exclusive – which includes plugging units and safety clamps, can be used on most straightway and round-way meter valves in sizes ranging from ½” through 2” if the valve has an FIOP outlet and the port thru the valve will permit the passage of the valve changer’s plugging unit.
Mueller Autoperf Tee
Mueller AUTOPERF Tees provide a fast economical w to make a main to service connection. These products have a self-contained, one piece, hardened perforator that is used to cut a hole in the main to initiate service. This eliminates the need for drilling machines and control valves. The perforator retains the pipe coupon and also functions as a shut-off. Installation is fast and simple using proven Mueller NO-BLO Methods and tools. Mueller AUTOPERF Tees are available with several popular inlet/outlet combinations.
Mueller H17055 Service Line Stopper Fitting
Mueller offers a full line of ¾” thru 2-1/2” line stopper fitting with pressure ratings from 125 PSIG to 1440 psig. The styles of fittings include standard split fittings, bottom out fittings, mechanical joint, insulated mechanical joint, extension stopper fittings and dead end extension stopper fittings. All these fitting are designed for use with Mueller tools and machines and use the proven Mueller NO-BLO method to make safe installations and stop offs under pressure with no blowing of gas.
Mueller Line Stopping System
The Mueller No-Blo Line Stopping System has the versatility to suit your specific needs. Choice of high or low pressure systems; bypass, double or single stop-offs; line extensions and branch connections; large or small lines and flow capacities – whatever the circumstances to your application, Mueller has the tools and parts to get the job done.
Large Diameter Side Out Fittings 3″ – 12″
The Mueller Side-Out Fitting offers an economical way to overcome obstacles in by-pass operations such as shallow bedrock beneath the line or interference from other utilities. Together with our bottom-out fittings, it allows new flexibility in line placement. The fitting is compatible with existing Mueller No-Blo Line Stopping System components and lets you maintain the safety and integrity that has made our system the industry standard for decades.
Large Diameter Bottom Out Fittings
A new bottom-out stopper is available from Mueller that will simplify repairs on existing by-pass lines where bottom-out fittings have been installed. It reliably stops the flow of natural gas by plugging the bottom opening with a dual-action mechanical stopper with a rubber seat. This eliminates the need to create new stops in the line, saving time and money.
Large Diameter Spherical Fittings
The Mueller No-Blo System is now compatible with the spherical style of stopper fitting. It’s possible to connect to either side or the bottom of a line using a Mueller Spherical Line Stopper Fitting by simply changing how the halves of the fitting are welded in place. Most important, the fitting uses standard Mueller No-Blo Stopper Equipment – the industry standard for safety and reliability.
Mueller H17190 Low Pressure Line Stopper Fitting
The Mueller Low Pressure Line Stopper Fittings offer a fast and economical way to make stop offs, bypass stop offs and lateral extensions on steel pipe up to 4” nominal size.
H17500 No Blo Service Tees
Mueller NO-BLO Service Tees are used to make main to service connections. These tees are available in a wide range of sizes and inlet and outlet combinations.
H17650 No Blo Service Valve Tee
Mueller NO-BLO Service Stop Tees are used to make a main to service connection. These tees have a mechanism that can be used to shut off the flow of gas in the service line. The mechanism makes a metal-to-metal seat in both the fully open and fully closed position to assure positive sealing. This mechanism has differential threads which develop powerful seating forces. An O-ring seal is provided between the stem and bushing for tees with maximum working pressures over 250 psig. These tees are available with weld or external (M.I.P.) thread inlets. Outlets include weld, external (M.I.P.) thread, internal (F.I.P.) thread and several styles of compression connections.
H17800 Curb Valve Tee
Mueller Curb Stop Tees are used to make main to service connections and also offer a means to control service line flow at the main. Mueller Curb Stop Tees can be used with curb boxes to provide a means to access the buried tee from above ground and also have a large operating head that is drilled to accept the attachment of a shut-off rod. These curb stop tees have accurately machined forged steel bodies and completion caps, one piece stainless steel stem, ductile iron operating nut, and O-ring sealed stem and completion cap.
Call (800) 777-7173 for all your American Meter Gas Meter and Regulation requirements
Elster American Meter is the industry’s leading supplier of diaphragm meters with modules for applications ranging from domestic service to large industrial users. The housing consists of a one piece cast aluminum alloy body and aluminum alloy top and covers. Elster American Meter diaphragm meters have an outstanding record for durability and reliability.
For over 160 years, Elster American Meter has been the leader in the measurement and control of natural gas. With a history of design innovations that have consistently improved the accuracy and the service life of gas meters. American Meter has pioneered the shift to aluminum-case meters as a replacement for cast iron and introduced the molded convoluted diaphragm that established new standards for long-term accuracy and reliability.